Depth-migrated High Resolution seismic reflection profiles and interval velocity models in the western Black Sea
This seismic data set was recorded in September 2015 on board the R/V Pourquoi Pas? during the GHASS cruise (IFREMER) on the western Black Sea, offshore Romania. The available profiles (part of the collected data) within this deposit are located on the continental slope, bathymetry between 500 to 1200 meters. The pre-processing of the seismic data included common midpoint binning @6.25 meters, trace and shot edition, source delay correction, and a 35-375 Hz band pass filtering. Detailed Root Mean Square Velocity analyses were performed on semblance panels computed using super gathers every 150 m. Normal Move Out time correction was then applied on the Common Mid Point (CMP) using these velocities prior to stack. Interval velocities were computed using the Dix equation. The velocity model was then interpolated every CMP location, converted to depth and smoothed to perform post-stack depth migration. The depth migrated sections and the depth velocity models have been output to standard SEG-Y rev1 format (https://library.seg.org/pb-assets/technical-standards/seg_y_rev1-1686080991247.pdf) with values written using “big-endian” byte ordering and IEEE floating-point. For a given profile, both SEGY files have the same number of traces and the same bin locations. Velocity unit is in meter.second-1. The depth sampling is set to 0.5 meter for both files. The recording delay is zero for the depth migration SEGY files. The delay is coded in meters and constant for a given depth velocity SEGY file, stored within the Trace Header (bytes 109-110). Trace coordinates are also stored within the Trace Header using WGS84 +DDDMMSS.ss format with a scale factor of -100 (bytes 81-88, which means that the value has to divided by 100) . For more convenient access to the location of the profiles, these coordinates are also stored into ASCII files using decimal degrees.
Data and resources
-
Depth-migrated seismic reflection profile GAS30d RESTRICTED - 52 MBHTML Open
-
Velocity model of profile GAS30d RESTRICTED - 29 MBHTML Open
-
Location of profile GAS30d traces - 110 KBHTML Open
-
Depth-migrated seismic reflection profile GAS31a RESTRICTED - 56 MBHTML Open
-
Velocity model of profile GAS31a RESTRICTED - 30 MBHTML Open
-
Location of profile GAS31a traces - 160 KBHTML Open
-
Depth-migrated seismic reflection profile GAS33c - 27 MBHTML Open
-
Velocity model of profile GAS33c - 15 MBHTML Open
-
Location of profile GAS33c traces - 76 KBHTML Open
-
Depth-migrated seismic reflection profile GAS34a RESTRICTED - 28 MBHTML Open
-
Velocity model of profile GAS34a RESTRICTED - 15 MBHTML Open
-
Location of profile GAS34a traces - 80 KBHTML Open
-
Depth-migrated seismic reflection profile GAS34b RESTRICTED - 44 MBHTML Open
-
Velocity model of profile GAS34b RESTRICTED - 17 MBHTML Open
-
Location of profile GAS34b traces - 126 KBHTML Open
-
Depth-migrated seismic reflection profile GAS36a RESTRICTED - 56 MBHTML Open
-
Velocity model of profile GAS36a RESTRICTED - 35 MBHTML Open
-
Location of profile GAS36a traces - 161 KBHTML Open
-
Depth-migrated seismic reflection profile GAS41 RESTRICTED - 27 MBHTML Open
-
Velocity model of profile GAS41 RESTRICTED - 14 MBHTML Open
-
Location of profile GAS41 traces - 78 KBHTML Open
-
HTML Open
-
HTML Open
Additional information
| Date (publication) | 2023-10-05 |
|---|---|
| Date (revision) | 2024-06-06 |
| Status | onGoing |
| Update frequency | asNeeded |
| Metadata language | en |
| License | CC-BY (Creative Commons - Attribution) |
| Source metadata | ISO 19115 XML |
| Last updated | 2026-11-04 |
| Created | 2026-11-04 |
| API | package_show |